FeRAM Embedded UHF Tag chip supports EPC Class 1 Generation2 (ISO18000-6 C standard)
It also supports Read/Write capability within 860~960MHz frequency.
- Frequency range : 860~960MHz
- ASK or PSK Modulation
- ASK 80 ~ 100% Demodulation
- Communication Speed rate, Transmission 40 ~ 640Kbps, Reception 40 ~ 160Kbps
- Support all mandatory Command and Optional Access Command
Supports EPC Class 1 Generation2(ISO18000-6 C)
- Frequency range : 860-930 MHz
- Modulation : DSB-ASK, SSB-ASK, PR-ASK
- Demodulation : ASK 80 ~ 100 %
Supports EPC Class 1 Generation2(ISO18000-6 C)
- Frequency Band : 860~960 MHz
- Output Power : 23dBm (Embedded Power Amp)
- Phone Interface : U-ART
- Processor Core : ARM7
- Air Interface Standard : ISO 18000-6C
Intelligent ubiquitous applications for UHF supporting EPC Global Class1 Gen2 standard
Active/Passive combination RFID node SoC development
- EPC Global Class1 Gen2 (ISO18000-6 type C) based passive RFID development
- EPC Global Class1 Gen2 (ISO18000-6 type C) based active RFID development
- Multi application individual mode passive/active RFID SoC design and development
- External MCU based passive/active RFID Firmware Development
<Development of Active/Passive UHF SoC for RFID node (EPC Global Class1 Gen2)>
3ALogics antenna is Loop Antenna for communication between reader and tag in 13.56MHz frequency. It has direct impact on tag recognition distance, and the distance is determined by antenna size and antenna matching value. Typically PCB antennas and flexible antennas made out of film are used with main applications such as digital door lock, access control, intelligent toys and other various applications. 3ALogics supports antenna design and development by customers.
> Technology > R&D Status
