First, it is applied to digital door lock, entrance/exit controller and electronic payment related products in mass production and recently its area is expanding to mobile related application.

In addition, 3ALogics’ RFID Chip is already in our life as it is applied to various areas including toys for children, genuine printer certification, library, genuine production certification.

It is not possible to specify exact price as chip price varies depending on order quantity, but this is supplied with competitive price comparing to other vendor’s any product with same performance.

MOQ is 1000 EA and sample price is applied to less quantity. 
The person in charge will make quick contact if you make inquiry by telephone or the product inquiry bulletin board.

TRH031M’s Carrier frequency is 13.56MHz, this is Muti-protocol reader chip supporting most protocols such as ISO14443A,B Type, ISO15693, etc., in one chip, and especially TRH031M’s power consumption is far better than other companies’ reader chip.

Power consumption in power down mode is under 0.1uA which makes dozens of times difference from other companies’ products.

The current of our chip in operation is 130 ~ 180mA. Also, anti-collision function needs hard ware function in the case of ISO14443A Type and ISO14443B Type and ISO15693 Type are processed by software.

TRH031M can realize Anti-collision with simple operation of software as it has hardware function for Anti-collision of ISO14443A Type.

RSK-100 board has been organized for Study kit on sale and Antenna tailor made on customer requested dimension is on sale.

Our company’s RSK-100 board is on sale as a kit. RSK-100 board and antenna are assembled in integral type where connection has V-CUT allowing separation for test in some distance and tag’s UID can be displayed without host PC, using LCD Module. In addition, another advantage is that TRH031M Chip is supplied in small quantity sample and you can make PCG on your own later. 

In the CD provided are folders of Document, Register map, Software and Transponder Specification, and a PDF file of user manual V1.0.
  1. Contents of Document folder 
  4. Transponder Specification
    - MF1C S50(moa2 high frequency)
    - SL058030(SL2ICS20)1024bit I-Code 2
Study Kit consists of RSK-100 Board, Adaptor, Serial Cable, TRH031M Chip Sample Smart Card (14443A type 2EA, 15693 I-CODE2 type 2EA) and more.

In general, when LCD is not turned on, anti clockwise rotation of the value on potentiometer shows a picture on the LCD. However, this is very rare case as products are tested before releasing. 
Please make an inquiry after checking that the voltage of the adapter is 4.5V and whether LCD Module is out of order.

Software called FLIP of ATMEL is needed to upload firm ware on RSK-100 board. Please download it from www.atmel.com.

Our board’s serial communication boud rate is 38400. Please check that.

RSK-100 board sold by our company is mass-produced and antenna matching value is being matched with average value designated. It is because L value of each board antenna shows a little difference.
If you want maximum distance, please visit our company or mail it. We will do re-matching.

ISO1800-3 14443A Type and 15693Type. 2EA for each type are provided.

It’s changing the status for program uploading rather than making a reset. JT1’s jumper line is shown on the board. It they are 1st, 2nd, and 3rd from the bottom, then put the jumpers into the 2nd and 3rd location and turn on the power to get program-in mode.
Please refer to the Board Manual in the CD distributed for details.

That is because LCD Module is working on 4.5. 
If you see the board, there is a regulator of 3.3V next to the DC-Jack.