3ALogics

PRODUCT

SMART NFC CHOICE FOR YOUR LIFE

구매문의 : 031-715-7117 E-mail : info@3alogics.com

제품상담 신청하기
제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기 제품소개자료 다운받기
>

PRODUCT

Specification

product_img
Frequency
13.56 MHz
Protocol
• ISO/IEC 14443 A/B
• ISO/IEC 15693
• Tag-it protocols
Modulation Type
ASK 5–35%, ASK 100%
Operating Range
Up to 10cm
Supply Voltage
2.9V ~ 3.6V
Package
32-pin LQFP (7.0mm × 7.0mm)

Feature

• Performs mixed analog and digital operations as specified by standards
• Power consumption optimization

- Hardware/Software power-down function
- Minimized leakage and standby current

• Microprocessor interface functions

- 128-byte FIFO buffer for immediate data storage
- Four types of parallel interfaces and one SPI serial interface

• Two transmit drivers can be configured
• Automatic calibration function for the analog receiver
• Transmit power and modulation index configuration
• Adjustable receiver sensitivity depending on noise conditions
• Configurable data rate and pulse width according to protocol standards
　　　　　

Specification

product_img
Frequency
13.56 MHz
Protocol
• ISO/IEC 14443 A/B
• ISO/IEC 15693
• Tag-it protocols
Modulation Type
ASK 5~35%, ASK 100%
Operating Range
Up to 10cm
Supply Voltage
2.9V ~ 3.6V
Package
32-pin LQFP (7.0mm × 7.0mm)

Feature

• Performs mixed analog and digital operations as specified by standards
• Power consumption optimization

- Hardware/Software power-down function
- Minimized leakage and standby current

• Microprocessor interface functions

- 128-byte FIFO buffer for immediate data storage
- Four types of parallel interfaces and one SPI serial interface

• Two transmit drivers can be configured
• Automatic calibration function for the analog receiver
• Transmit power and modulation index configuration
• Adjustable receiver sensitivity depending on noise conditions
• Configurable data rate and pulse width according to protocol standards
　　　　　

Specification

product_img
Frequency
13.56MHz
Operating Temp
-40 ~ 125°C
Protocol
ISO/IEC 14443 A/B, 15693 Standards I-CODE, Tag-It, Felica, Jewel Protocols, ISO/IEC 18092
Modulation Type
ASK 5~35% & ASK 100%
Operating Range
Up to 10cm Depending on Tag Type
Supply Voltage
3.0V ~ 5.0V TX Power
3.0V Analog and Logic power
ESD(HBM)
8kV
Host Interface
SPI/I2C
Internal LDO
Yes
Package
24pin QFN (4.0mm x 4.0mm)
Certification
AEC-Q100 (Grade1), Certification Release 13(CCC Digital Key Reader Device, NFC Reader Device)

Feature

• Basic information

- 13.56MHz multi-protocol NFC reader IC
- Internal card detector (with internal 50kHz oscillator)

• Supports mixed analog and digital operations in compliance with standards

- Modulation/Demodulation, Encoding/Decoding
- Framing and collision detection for anti-collision

• Microprocessor interface functions

- 256-byte FIFO buffer for immediate data storage
- Configurable interrupt to notify the microprocessor of events
- Configurable and adjustable timer function, synchronized with transceiver state and interrupt

• Minimized power consumption

- Hardware/software power-down function
- Minimized leakage and standby current

　　　　　

Specification

product_img
Frequency
13.56MHz
Protocol
ISO/IEC14443 A/B, ISO/IEC15693, Tag-It, Felica, Jewel, Tag-It, ISO/IEC18092
Supply Voltage
3.0 ~ 5.5V
Operating Temp
-40°C ~ 125°C
Host Interface
SPI, I2C
Package
32pin QFN (4.0mm X 4.0mm)
Low Power Card Detector
Internal 32kHz RCOSC, 8bit ADC, Phase Detector
LDO
Pwr Mod.: < 4.5 LDO / Analog: 1.8V LDO, Digital: 1.8V LDO
Certification
AEC-Q100(Grade1), NFC Forum(Certification Release 13 Reader, CCC Digital Key Reader)

Feature

• Supports mixed analog and digital operations in compliance with standards

- Modulation/Demodulation, Encoding/Decoding
- Framing and collision detection for anti-collision
- Transmitter RF shape control and dynamic power control
- Transmitter overshoot/undershoot protection logic
- Receiver I/Q architecture and AGC (RSSI) function
- Clock recovery for active communication

• Microprocessor interface functions

- 512-byte FIFO buffer for immediate data storage
- Asynchronous SPI up to 7 Mbps, I²C up to 3.4 Mbps serial interface
- Configurable interrupt to notify the microprocessor of events
- Configurable and adjustable timer function, synchronized with transceiver state and interrupt

• Minimized power consumption

- Hardware/software power-down function
- Minimized leakage and standby current

• Other functions

- Configurable data rate and pulse width according to protocol standards
- Test pins for operation check
- Quartz oscillator capable of operating at 27.12 MHz
- Embedded temperature sensor (±5 ℃)

　　　　　

Specification

product_img
Frequency
13.56MHz
Operating Temp
-40 ~ 85°C
Protocol
NFC Forum Type3 Tag
JIS 6319-4
Data Rate
214 / 424Kbps
Supply Voltage
2.0V ~3.6 (VCC)
Host Interface
I2C
Memory
1Kbyte EEPROM, 64byte SRAM
Package
8pin XQFN (1.6mm x 1.6mm)

Feature

• Functions for microprocessor interface

- I2C Slave (Up to 400kHz)
- IRQ Output to Advise Tag status monitoring

• Energy harvesting

- Rectifier power out (VREC) Up to 20mW, Not regulated
- Depending on external RF and Antenna condition

• Power consumption minimization

- Optimized logic and Internal gated low frequency clock
- Minimized leakage and Stand by current

　　　　　

Specification

product_img
Frequency
13.56MHz
Operating Temp
-40 ~ 85°C
Protocol
NFC Forum Type3 Tag
JIS 6319-4
Data Rate
212Kbps
Supply Voltage
1.62V ~ 3.6V
Em-MCU
Flip8051-Cyclone
Host Interface
UART/I2C
Memory
6Kbyte EEPROM, 2Kbyte RAM
ETC Information
Em-12bit ADC, Sensor
Interface, Internal LDO
Package
16pin QFN (4mm x 4mm)

Feature

• 4Stage pipeline architecture, 12Times faster than the legacy 80C51/52
• Analog RF field detection and Wakeup
• Integrated RF tuning capacitor
• 4Channel 12bit-ADC with sensor trigger interface
• Internal 1.8V LDO
• Integrated PWM and Current drive sensor interface controller
• Energy harvesting

- Up to 5.0mA @ 3.0 V (Harvesting VREC)
- Depend on external antenna and RF condition

　　　　　

Specification

product_img
Frequency
13.56MHz
Operating Temp
-40~ 85°C
Support protocol
NFC Forum Type 3 Tag
JIS 6319-4
Data Rate
212kbps
Supply Voltage
1.62V ~ 3.6V
Em-MCU
Flip8051-Cyclone
Host Interface
UART/I2C/SPI
Memory
32Kbyte Flash, 2Kbyte RAM
Package
QFN28(4x4mm)
ETC Information
Em-12bit ADC, Sensor Interface, Internal LDO

Specification

product_img
Frequency
13.56MHz
Protocol
ISO/IEC 14443 A/B, ISO/IEC 15693, Felica
PCB Size
39mm x 20mm x 6.5mm
DC Power
5V
TX driver Power
Max 80mA
Antenna
HF Loop antenna, 42mm x 27mm x 6.5mm
Antenna cable 200 mm
Interface
UART
Operating Range
Up to 70mm
Operating Temper
-20 ~ 65°C

Feature

›  Supports protocol
    - ISO/IEC 14443 A,B, ISO/IEC 15693, Felica
›  13.56MHz RFID Reader module
›  Based on the TRH033M-S
›  Microcontroller – 8Kbyte Flash, 1Kbyte SRAM, 512byte EEPROM
›  Separated antenna with board
›  RS-232 Serial interface
　　　　　

Specification

product_img
Frequency
13.56MHz
Protocol
ISO/IEC 14443 A / B, ISO/IEC 15693 Felica
PCB Size
30mm x 50mm x 11mm
DC Power
5V
TX driver Power
Max 80mA
Antenna
HF Loop antenna, 28mm x 48mm
Interface
UART
Operating Range
Up to 50mm
Operating Temp
-20 ~ 65°C

Feature

›  Supports protocol
   - ISO/IEC 14443 A,B, ISO/IEC 15693, Felica
›  13.56MHz RFID Reader module
›  Based on the TRH033M-S
›  8Kbyte Flash, 1Kbyte SRAM, 512byte EEPROM
›  On board HF Loop antenna
›  RS-232 Serial interface
　　　　　

Specification

product_img
Frequency
13.56MHz
PCB Size
52mm x 67mm x 4.5mm
DC Power
5V Max
TX Driver Power
80mA
Antenna
HF Loop antenna, 50mm x 37mm x 4.5mm
Antenna cable 200mm
Interface
USB
Operating Range
Up to 70mm
Operating Temperature
-20 ~ 65°C

Feature

›  Based on the TRH033M-S
›  Separated antenna with board
›  Supports protocol
   - ISO/IEC 14443 A,B, ISO/IEC 15693, Felica,Topaz, ISO/IEC 18092 (Active P2P)
›  Support ISO/IEC 18092 (NFCIP-1) / ECMA 340
   - RFID Reader and Writer mode
   - Peer to Peer mode
›  Support all NFC Forum Tags (Type1 , 2, 3, 4)
›  Active initiator and Active/Passive target mode according to ISO/IEC 18092
›  8Kbyte Flash, 1Kbyte SRAM, 512byte EEPROM
　　　　　

Specification

product_img
Frequency
13.56MHz
PCB Size
64mm x 84mm x 4.5mm
DC Power
5V Max
TX Driver Power
100mA
Antenna
HF Loop antenna
56mm x 62mm
Interface
USB
Operating Range
Up to 50mm
Operating Temperature
-20 ~ 65°C

Feature

›  Based on the TRH033M-S
›  On board HF Loop antenna
›  Supports protocol
   - ISO/IEC 14443 A,B, ISO/IEC 15693, Felica, Topaz, ISO/IEC 18092 (Active P2P)
›  Support ISO/IEC 18092 (NFCIP-1) / ECMA 340
   - RFID Reader and Writer mode
   - Peer to Peer mode
›  Support all NFC Forum Tags (Type1 , 2, 3, 4)
›  Active initiator and Active/Passive target mode according to ISO/IEC 18092
›  Microcontroller– 8Kbyte Flash, 1Kbyte SRAM, 512byte EEPROM
　　　　　

Specification

product_img
Frequency
13.56MHz
Protocol
ISO/IEC 15693, NXP SL2 ICS20 (I-CODE)
Size
220mm x 125mm x 80mm - Housed
Baud Rate
1.6 / 26.5Kbps
Anti-collision
Available
DC Power
24V DC
TX Power
Max 3W
Antenna
TRA-400L, 50ohm External antenna
RF Coaxial Cable Type
350mm x 420mm x 45mm
Interface
RS232/485
Operating Range
Up to 50
Operating temperature
-20°C ~ 65°C

MCU Feature

›  Only ISO/IEC 15693
›  13.56MHz Long range Reader module
›  Based on the TRH033M-S
›  External power boost up circuit
   - Based on the BLF245 (Power TR)
›  Microcontroller with 1Kbyte SRAM, 512byte EEPROM
›  Separated antenna with board (50ohm)
›  RS-232/485 Serial interface
›  6 LED indicators
　　　　　

Specification

product_img
Frequency
13.56MHz
Protocol
ISO/IEC 14443 A/B, 15693 Standards I-CODE, Tag-It, Felica, Jewel, HCE protocols
Size
112 x 62 x 15mm (L x W x H)
DC Power
5V (USB)
Interface
USB
Operating Range
Up to 10cm depending on tag type

Specification

product_img
NFC Frequency
13.56MHz
NFC Protocol
ISO/IEC 15693 Standard, (NXP SL2 ICS20, I-CODE)
Operating Range
Up to 50cm
Display
7” TFT LCD, 3Color LED
OS
MS Windows XP, 7
Entrance Control
Bipod Turnstile bar
Electro-mechanical motor Rotation
Positive locking operation for one person at a time
Power
24V DC SMPS 250W x 2

Specification

product_img
Frequency
13.56MHz
NFC Protocol
ISO/IEC 14443 A type (Type2)
ISO/IEC 15693
Power
5.0V USB Power
TEST Antenna
0.5μH ~ 5μH
NFC IC
Based on TRH033M-S
Dimension
NFC Reader Board
65mm x 100mm x 12mm
Matching Board
65mm x 50mm x 10mm
Antenna interface Board
15mm x 15mm x 5mm
NTJ-100
95mm x 305mm x 40mm
Special Feature
• 4 LED indicator
• 1 Buzzer
• Antenna impedance matching adjustment : 2 trimmer - Shunt/Series
• Receiver signal dynamic range adjustment : variable resistor

Feature

[ NTJ-100 Component ]


›  NFC/RFID Reader Board 1EA
›  Acrylic Mount Board 1 EA
›  Antenna Matching Board 5 EA
    -  0.5μH ≤ Lant ≤ 0.7μH Board 1EA
    -  0.7μH ≤ Lant ≤ 1.0μH Board 1EA
    -  1.0μH ≤ Lant ≤ 1.5μH Board 1EA
    -  1.5μH ≤ Lant ≤ 2.5μH Board 1EA
    -  2.5μH ≤ Lant ≤ 5.0μH Board 1EA
›  Antenna Connector Board 10EA
›  Reference Antenna 2EA (2Type)
›  Reference ISO/IEC 14443 A TAG 1EA
    -  ISO/IEC15693 TAG 1EA
› Adjustment tool 1EA

　　　　　

Specification

product_img
Frequency
6.78MHz ± 15kHz
Specification
A4WP Wireless Power Transfer System
Baseline System Specification (BSS)
V1.2.1
PRU Antenna
Category 3
PRU Application
Smart phone
Dimension
Measurement Board
65mm x 70mm x 10mm
Matching Board
65mm x 70mm x 10mm
Reference Matching Board
65mm x 70mm x 10mm
Reference Antenna Board
65mm x 80mm x 6mm
Antenna Interface Board
65mm x 20mm x 6mm
Special Feature
- Separated 3 Part Board
- Power Measurement Board
- Matching Board
- Antenna & Antenna interface Board
- Output Current Range 1.5A
- Output Voltage Range 38V
- 7LED Receive indicator (5V, 10V, 15V, 20V, 24V, 30V, 36V)

Specification

product_img
Frequency
13.56MHz
Protocol
ISO/IEC 14443 A/B, 15693
Standards I-CODE, Tag-it
Felica, Jewel Protocols
Reader Size
110mm x 74mm (L x W)
Antenna Size
80mm x 53mm (L x W)
Balun Module Size
20mm x 20mm (L x W)
DC Power
5V (DC jack)
Interface
RS232
Operating Range
Up to 10cm Depending on Tag Type

MCU Feature

›  Microcontroller with 256Kbyte RAM, 64Kbyte ROM
›  On board HF Antenna coil
›  16 X 2 Character LCD module  
　　　　　

Specification

product_img
Frequency
13.56MHz
Operating Temp
-40 ~ 85°C
Protocol
NFC Forum Type2 Tag
ISO14443A
Data Rate
106Kbps
Supply Voltage
1.62V ~ 3.6V (VCC)
Host Interface
I2C
Memory
1Kbyte EEPROM, 64byte SRAM
Package
8pin XQFN (1.6mm x 1.6mm)

Feature

• Functions for microprocessor interface

- I2C Slave (Up to 400kHz)
- IRQ Output to Advise Tag status monitoring

• Energy harvesting

- Rectifier power out (VREC) Up to 20mW, Not regulated
- Depending on external RF and antenna condition

• Power consumption minimization

- Optimized logic and Internal gated low frequency clock
- Minimized leakage and stand by current

• 32bit password protection to prevent unauthorized memory access
• Lock and Capability container (CC) byte with anti-tearing protection
• Lock and CC bytes with OTP access bits
　　　　　

Specification

product_img

Feature

›  NFC Forum Class 0-250mW WLC Poller
›  One antenna for wireless power transfer and NFC communication
›  Automatic foreign object detector
›  Wireless Power Transfer(WPT) Automatic stop
›  ISO 14443 A/B, ISO 15693, NFC Type3 support
›  Automatic card detector function
›  Serial Interface
    - I2C Slave, SPI
›  256byte FIFO buffer for immediate storage
›  5.0V operation, 28pin package
　　　　　

Specification

product_img
Frequency
13.56MHz
Operating Temp
-40 ~ 85°C
Protocol
NFC Forum Type2 Tag
Data Rate
106Kbps
Interface
Open drain mode port
Memory
188byte LogicNVM (100,000 cycle endurance)
Memory Access Protection
32bit password
UID
7byte UID
Package
DOW (Die on Wafer)
* Au bump / 120µm thickness / On film carrier

Feature

• Configurable RF field or tamper detection pin RFTP
• True anticollision
• Non-Volatile memory

- 184bytes organized in 46pages with 4bytes per page
- 144bytes for user data area (36pages)
- 40bytes for UID/CC/LO CK/System configuration area (10pages)
- Password protection with optional limit of unsuccessful attempts
- Lock and Capability container (CC) byte with anti-tearing protection
- Lock and CC bytes with OTP access bits
- Data retention of 10 years

　　　　　

3ALogics
PRODUCT

TECHNICAL
DATA